Back-To-Back Wsx Using T1 Ports - Alcatel Omni Switch/Router User Manual

Application Examples
Software in the switch allows you to configure access rate, clocking and protocol-related
parameters. Additional software commands allow you to view status at the
or protocol level. Extensive statistics are provided at each level, including a breakdown of
traffic by frame type (Ethernet,

Back-to-Back WSX Using T1 Ports

WAN switching modules may be connected "back-to-back" without an intervening Frame
Relay network or switch. Because the T1 port internally provides a DSU/CSU function, an
external DSU/CSU is not required. Such connections are made by using private leased lines,
such as lines, instead of public Frame Relay networks, usually over large geographic
T1
distances.
Page 28-8
, , or
IP IPX BPDU
Back-to-Back Configuration Using Fractional T1 Ports
) at the virtual circuit or PPP connection level.
board, port,
WSX