Deleting An Isdn Configuration Entry - Alcatel Omni Switch/Router User Manual

Deleting an ISDN Configuration Entry
The command is used to delete one or more ISDN configuration entries. Deleting the
configuration entry is equivalent to returning the ISDN port to its default settings. Although
you cannot delete a physical ISDN port from the switch, you can remove the configuration
entry that was recorded for a port.
1. To delete a specific ISDN entry, for example, for a board in slot/port 2/2, you would enter
the following command:
A screen similar to the following displays:
2. To delete this entry, enter and press
the default answer of "No." The system prompt will then reappear.
After deleting an ISDN configuration entry, you should
reboot the switch to implement any configuration
changes you make using the
To abort the deletion, press
Important Note
command.

Deleting an ISDN Configuration Entry

to accept
Page 32-5