Displaying Bridge Port Statistics - Alcatel Omni Switch/Router User Manual

Bridging Commands

Displaying Bridge Port Statistics

You can display statistics on bridge ports with the
tics enter the
where
statistics. For example, to view statistics for Group 1, you would enter the following:
This command will display a table similar to the following:
As a variation on this command, you can enter
This will display the port statistics for the currently selected group. For information on select-
ing a group, see Selecting a Default Group on page 17-7.
Page 17-14
command as follows:
is the number of the group for which you want to view bridge port
command. To view bridge port statis-
at the prompt without a group number.