Alcatel Omni Switch/Router User Manual page 1046

Running Hardware Diagnostics
Page 36-8
Functional testing of physical ports with continuous full-wire traffic. The
data packets are initially generated by the
and looped back through external cables or wrap plugs. Once the packets
are returned, modifications in the packets' destination address allows the
packets to continuously circulate between the
cables or wrap plugs for a predefined period. Once the predefined period
is reached the packets are returned to the
on a bit by bit basis by the
requires the file to be in the flash memory. Stress test requires the
use of external cables or wrap plugs. The system will provide user with
instructions for setting up external cables or wrap plugs for stress test and
prompts the user for input upon completion of setup. For more informa-
tion on port tests, see Port Tests on page 36-9. For information on cables
required for the port test, see Omni Switch/Router Port Test Wrap
Cable/Plug Requirements on page 36-10 for the Omni Switch/Router.
Tests the submodule's local memory. Includes testing local memory control
logic, data/address lines, and local memory.
Tests the registers. Includes testing the
SUNI
and data/address lines.
Tests the Telluride registers. Test the Telluride ASIC control logic,
ASIC
registers, and data/address lines.
Tests the Whistler registers. Test the Whistler control logic, registers, and
data/address lines.
Tests the detection of
DCE
tor is prompted for the appropriate cable connection.
Tests the Alcatel . Tests the Alcatel
CAM
the data line and buffers.
, sent out the physical port,
MPX
NI CPU
. The packets are checked
MPX
. If Ethernet type switch is tested, this test
MPX
control logic, registers,
SUNI
and cables by the
DTE WSX
control logic,
CAM
and the external
circuitry. The opera-
access, and
CAM