Analyze Network Traffic - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

Analyze network traffic

The Connect IT 4 device includes a network analyzer tool that captures data traffic on any interface

and decodes the captured data traffic for diagnostics. You can capture data traffic on multiple

interfaces at the same time and define capture filters to reduce the captured data. You can capture

up to 10 MB of data traffic in two 5 MB files per interface.

To perform a more detailed analysis, you can download the captured data traffic from the device and

view it using a third-party application.

Data traffic is captured to RAM and the captured data is lost when the device reboots unless you

save the data to a file. See

This section contains the following topics:

Configure packet capture for the network analyzer

Example filters for capturing data traffic

Capture packets from the command line

Stop capturing packets

Show captured traffic data

Save captured data traffic to a file

Download captured data to your PC

Clear captured data

Digi Connect IT® 4 User Guide

Save captured data traffic to a

Analyze network traffic