ABB ACS280 Firmware Manual page 402

Fieldbus control through the embedded fieldbus interface (EFB)
402
Sub-
Index Name
index
1010h 0 Largest
Subindex
Supported
1 Save All
Parameters
2 Save
Communicati
on
parameters
3 Save
Application
parameters
4 Save Drive
parameters
1011h 0 Largest
Subindex
Supported
1 Restore All
Default
Parameters
2 Restore
Communicati
on Default
Parameters
3 Restore
Application
Default
Parameters
4 Restore Drive
Default
Parameters
1014h 0 COB-ID
Emergency
Message
1016h 0 Number Of
Entries
1 Consumer
Heartbeat
Time
Type Access Description
U8 RO This entry supports saving of parameters
in non-volatile memory. With read access
the device provides information about its
saving capabilities. Several parameter
U32 RW
groups are distinguished.
Sub index 1: all parameters
U32 RW
Sub index 2: communication parameters
(1000h...1FFFh)
Sub index 3: application parameters
(6000h...9FFFh)
U32 RW
Sub index 4: request drive to perform
parameter save function
For saving the signature 'save'
U32 RW
(65766173h) must be written.
U8 RO This entry supports restoring of default
parameters. With read access the device
provides information about its capabilities
to restore these values. Several
U32 RW
parameter groups are distinguished.
Sub index 1: all parameters
Sub index 2: communication parameters
U32 RW
(1000h...1FFFh)
Sub index 3: application parameters
(6000h...9FFFh)
Sub index 4: request drive to perform
U32 RW
parameter restore function
For restoring, the signature 'load'
(64616F6Ch) must be written.
U32 RW
U32 RW COB-ID used for emergency message
(Emergency Producer).
U8 RO The consumer heartbeat time defines the
expected heartbeat cycle time and thus
has to be higher than the corresponding
U32 RW
producer heartbeat time configured on the
device producing this heartbeat.
The bits 31-24 of each sub-index have to
be 0.
The bits 23-16 contain the node-id.
The lower 16 bits contain the heartbeat
time