ABB ACS280 Firmware Manual page 355

Fieldbus control through the embedded fieldbus interface (EFB)
Parameter
22.18 Ext2 speed ref1
26.11 Torque ref1
source
26.12 Torque ref2
source
28.11 Ext1 frequency
ref1
28.15 Ext2 frequency
ref1
EFB references can be selected as the source at virtually any signal selector parameter
by selecting Other, then either
96.07 Parameter save
manually
Setting for
fieldbus control
EFB ref1
TORQUE REFERENCE SELECTION
EFB ref1
EFB ref1
FREQUENCY REFERENCE SELECTION
EFB ref1
EFB ref1
OTHER SELECTIONS
03.09 EFB reference 1
SYSTEM CONTROL INPUTS
(reverts to
Save
Done)
Function/Information
Selects a reference received through the
embedded fieldbus interface as speed
reference 2.
Selects a reference received through the
embedded fieldbus interface as torque
reference 1.
Selects a reference received through the
embedded fieldbus interface as torque
reference 2.
Selects a reference received through the
embedded fieldbus interface as frequency
reference 1.
Selects a reference received through the
embedded fieldbus interface as frequency
reference 2.
or
03.10 EFB reference
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
355
2.