ABB ACS280 Firmware Manual page 169

No. Name/Value
26.71 Torque reference act 2
-1600.0...1600.0%
26.72 Torque reference act 3
-1600.0...1600.0%
26.73 Torque reference act 4
-1600.0...1600.0%
26.74 Torque ref ramp out
-1600.0...1600.0%
26.75 Torque reference act 5
-1600.0...1600.0%
26.76 Torque reference act 6
-1600.0...1600.0%
26.81 Rush control gain
0.0 ...10000.0
26.82 Rush control
integration time
0.0 ...10.0 s
28
28 Frequency reference chain
28.01 Frequency ref ramp
input
-598.00...598.00 Hz
Description
Displays the value of torque reference source 2
(selected by parameter
the control chain diagram on page
This parameter is read-only.
Value of torque reference source 2.
Displays the torque reference after the function
26.13 Torque ref1 function
applied by parameter
any), and after selection (
selection
). See the control chain diagram on page
This parameter is read-only.
Torque reference after selection.
Displays the torque reference after application of
reference additive 1. See the control chain diagram on
423
page .
This parameter is read-only.
Torque reference after application of reference
additive 1.
Displays the torque reference after limiting and
ramping. See the control chain diagram on page
This parameter is read-only.
Torque reference after limiting and ramping.
Displays the torque reference after control mode
selection. See the control chain diagram on page
This parameter is read-only.
Torque reference after control mode selection.
Displays the torque reference after torque trim. See
the control chain diagram on page
This parameter is read-only.
Torque reference
Rush controller gain term. See section
43
(page ).
Rush controller gain (0.0 = disabled).
Rush controller integration time term.
Rush controller integration time (0.0 = disabled).
Settings for the frequency reference chain.
See the control chain diagrams on pages
Displays the used frequency reference before
ramping. See the control chain diagram on page
This parameter is read-only.
Frequency reference before ramping.
26.12 Torque ref2 source
423
.
26.14 Torque ref1/2
424
.
Rush control
426
and
Parameters 169
Default
FbEq 16
-
). See
See par.
46.03
-
(if
423
.
See par.
46.03
-
See par.
46.03
-
423
.
See par.
46.03
-
424
.
See par.
46.03
-
See par.
46.03
5.0
1 = 1
2.0 s
1 = 1 s
424
.
-
423
.
See par.
46.02