ABB ACS280 Firmware Manual page 116

116 Parameters
No. Name/Value
12.04 AI supervision selection
Bit Name
0 AI1 < MIN
1 AI1 > MAX
2 AI2 < MIN
3 AI2 > MAX
4...15 Reserved
0000h...FFFFh
12.05 AI supervision force
Bit Name
0 AI1 Ext1
1 AI1 Ext2
2 AI1 Local
3 Reserved
4 AI2 Ext1
5 AI2 Ext2
6 AI2 Local
7...15 Reserved
0000h...FFFFh
12.11 AI1 actual value
0.000...22.000 mA or
0.000...11.000 V
12.12 AI1 scaled value
-32768 ... 32767
12.13 AI1 forced value
-
12.15 AI1 unit selection
V
mA
Description
Specifies the analog input limits to be supervised. See
12.03 AI supervision function
parameter
Description
1 = Minimum limit supervision of AI1 active.
1 = Maximum limit supervision of AI1 active.
1 = Minimum limit supervision of AI2 active.
1 = Maximum limit supervision of AI2 active.
Activation of analog input supervision.
Activates/deactivates analog input supervision for
each control location (see section
control locations
on page
When a control location does not utilize AI for
referencing, you can use this parameter to deactivate
12.04
AI supervision ( ). This hides the AI supervision
12.03
function ( ) for the selected control location.
Description
1 = AI1 supervision is active when EXT1 is used.
1 = AI1 supervision is active when EXT2 is used.
1 = AI1 supervision is active when local control is used.
1 = AI2 supervision is active when EXT1 is used.
1 = AI2 supervision is active when EXT2 is used.
1 = AI2 supervision is active when local control is used.
Activation of analog input supervision.
Displays the value of analog input AI1 in mA or V
(depending on whether the input is set to current or
voltage by a hardware setting).
This parameter is read-only.
Value of analog input AI1.
Displays the value of analog input AI1 after scaling.
12.19 AI1 scaled at AI1 min
See parameters
AI1 scaled at AI1 max
.
This parameter is read-only.
Scaled value of analog input AI1.
Defines the forced value that can be used instead of
the true reading of the input. See parameter
force selection
.
Selects the unit for readings and settings related to
analog input AI1.
Volts.
Milliamperes.
.
Local and external
26
).
12.20
and
12.02 AI
Default
FbEq 16
0000h
1 = 1
0b0000
1 = 1
-
1000 = 1 unit
-
1 = 1
-
1000 = 1 -
V
2
10