ABB ACS280 Firmware Manual page 167

No. Name/Value
Control panel (ref
saved)
Control panel (ref
copied)
Frequency input 2
Other
26.12 Torque ref2 source
26.13 Torque ref1 function
Ref1
Add (ref1 + ref2)
Sub (ref1 - ref2)
Mul (ref1 × ref2)
Min (ref1, ref2)
Max (ref1, ref2)
26.14 Torque ref1/2 selection
Torque reference 1
Torque reference 2
Description
03.01 Panel reference
Panel reference (
saved by the control system for the location where
the control returns is used as the reference.
Reference
Ext1 -> Ext2
03.01 Panel reference
Panel reference (
for the previous control location is used as the
reference when the control location changes if the
references for the two locations are of the same type
(eg frequency/speed/torque/PID); otherwise, the
actual signal is used as the new reference.
Reference
Ext1 -> Ext2
11.46 Freq in 2 actual value
a frequency input).
Source selection (see
Selects torque reference source 2.
For the selections, and a diagram of reference source
selection, see parameter
Selects a mathematical function between the
reference sources selected by parameters
Torque ref1 source
and
26.11 Torque ref1 source
diagram at
26.11 Torque ref1 source
Signal selected by
torque reference 1 as such (no function applied).
The sum of the reference sources is used as torque
reference 1.
26.11 Torque ref1 source
The subtraction ([
Torque ref2 source
]) of the reference sources is used
as torque reference 1.
The multiplication of the reference sources is used as
torque reference 1.
The smaller of the reference sources is used as torque
reference 1.
The greater of the reference sources is used as torque
reference 1.
Configures the selection between torque references 1
and 2. See diagram at
0 = Torque reference 1
1 = Torque reference 2
0.
1.
, see page
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
, see page
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
(when DI3 or DI4 is used as
Terms and abbreviations
26.11 Torque ref1 source
26.11
26.12 Torque ref2 source
.
is used as
] - [
26.11 Torque ref1 source
Parameters 167
Default
FbEq 16
96
) 18
96
) 19
22
). -
Zero
.
Ref1
. See
0
1
26.12
2
3
4
5
Torque
reference 1
.
0
1