ABB ACS280 Firmware Manual page 233

No. Name/Value
40.44 Set 1 sleep delay
0.0...3600.0 s
40.45 Set 1 sleep boost time
0.0...3600.0 s
40.46 Set 1 sleep boost step
0.0...200000.0 PID
customer units
40.47 Set 1 wake-up deviation
-200000.00...200000.0
PID customer units
40.48 Set 1 wake-up delay
0.00...60.00 s
40.49 Set 1 tracking mode
Not used
Used
DI1
DI2
DI3
DI4
Supervision 1
Supervision 2
Supervision 3
Description
Defines a delay before the sleep function actually
becomes enabled, to prevent nuisance sleeping.
The delay timer starts when the sleep mode is
enabled by parameter
resets when the sleep mode is disabled.
Sleep start delay.
Defines a boost time for the sleep boost step. See
40.46 Set 1 sleep boost step
parameter
Sleep boost time.
When the drive is entering sleep mode, the process
setpoint is increased by this value for the time
defined by parameter
If active, sleep boost is aborted when the drive wakes
up.
Sleep boost step.
Defines the wake-up level as deviation between
process setpoint and feedback.
When the deviation exceeds the value of this
parameter, and remains there for the duration of the
40.48 Set 1 wake-up delay
wake-up delay (
wakes up.
40.31 Set 1 deviation inversion
See also parameter
Wake-up level (as deviation between process setpoint
and feedback).
Defines a wake-up delay for the sleep function to
prevent nuisance wake-ups. See parameter
1 wake-up deviation
.
The delay timer starts when the deviation exceeds the
40.47 Set 1 wake-up deviation
wake-up level (
resets if the deviation falls below the wake-up level.
Wake-up delay.
Activates (or selects a source that activates) tracking
mode. In tracking mode, the value selected by
40.50 Set 1 tracking ref selection
parameter
substituted for the PID controller output. See also
Tracking
section (page
1 = Tracking mode enabled
0.
1.
10.02 DI delayed status
Digital input DI1 (
10.02 DI delayed status
Digital input DI2 (
10.02 DI delayed status
Digital input DI3 (
10.02 DI delayed status
Digital input DI4 (
32.01 Supervision status
Bit 0 of
32.01 Supervision status
Bit 1 of
32.01 Supervision status
Bit 2 of
40.43 Set 1 sleep level
, and
.
40.45 Set 1 sleep boost time
), the drive
40.47 Set
), and
is
58
).
, bit 0).
, bit 1).
, bit 2).
, bit 3).
.
.
.
Parameters 233
Default
FbEq 16
60.0 s
1 = 1 s
0.0 s
1 = 1 s
0.00 PID
customer
. units
1 = 1 PID
customer
unit
0.00 PID
customer
units
.
1 = 1 PID
customer
unit
0.50 s
1 = 1 s
not used
0
1
2
3
4
5
21
22
23