ABB ACS280 Firmware Manual page 185

No. Name/Value
Other [bit]
30.19 Minimum torque 1
-1600.0...0.0%
30.20 Maximum torque 1
0.0...1600.0%
30.21 Min torque 2 source
Zero
AI1 scaled
AI2 scaled
PID
Minimum torque 2
Other
30.22 Max torque 2 source
Zero
AI1 scaled
AI2 scaled
PID
Maximum torque 2
Description
Terms and abbreviations
Source selection (see
Defines a minimum torque limit for the drive (in
percent of nominal motor torque). See diagram at
30.18 Torq lim sel
parameter
The limit is effective when
• the source selected by
30.18 Torque limit set 1
• is set to
WARNING! Do not use minimum torque to stop
reverse rotation of the motor. Usage of
minimum torque limits disables the drive to
reach zero speed and fails to stop the motor.
Minimum torque limit 1.
Defines a maximum torque limit for the drive (in
percent of nominal motor torque). See diagram at
30.18 Torq lim sel
parameter
The limit is effective when
• the source selected by
30.18 Torque limit set 1
• is set to
Maximum torque 1.
Defines the source of the minimum torque limit for
the drive (in percent of nominal motor torque) when
• the source selected by parameter
is 1, or
30.18 Torque limit set 2
• is set to
30.18 Torq lim sel
See diagram at
Note: Any positive values received from the selected
source are inverted.
None.
12.12 AI1 scaled value
(see page
12.22 AI2 scaled value
(see page
40.01 Process PID output actual
process PID controller).
30.23 Minimum torque 2
Terms and abbreviations
Source selection (see
Defines the source of the maximum torque limit for
the drive (in percent of nominal motor torque) when
• the source selected by parameter
is 1, or
30.18 Torque limit set 2
• is set to
30.18 Torq lim sel
See diagram at
Note: Any negative values received from the selected
source are inverted.
None.
12.12 AI1 scaled value
(see page
12.22 AI2 scaled value
(see page
40.01 Process PID output actual
process PID controller).
30.24 Maximum torque 2
.
30.18 Torq lim sel
is 0, or
.
.
30.18 Torq lim sel
is 0, or
.
30.18 Torq lim sel
.
.
116
).
118
).
(output of the
.
30.18 Torq lim sel
.
.
116
).
118
).
(output of the
.
Parameters 185
Default
FbEq 16
). -
-300.0%
See par.
46.03
300.0%
See par.
46.03
Minimum
torque 2
0
1
2
15
16
). -
Maximum
torque 2
0
1
2
15
16