ABB ACS280 Firmware Manual page 193

No. Name/Value
Warning/Warning
Event/Event
No Indication/No
Indication
31.23 Wiring or earth fault
No action
Fault
31.24 Stall function
No action
Warning
Fault
31.25 Stall current limit
0.0...1600.0%
Description
Inputs
Indication (running or stopped)
IN1 IN2
0 0 Warning
0 1 Fault
1 0 Fault
1 1
Inputs
Indication (running or stopped)
IN1 IN2
0 0 Event
B5A0 Safe torque off
Event
0 1
FA81 Safe torque off 1
B5A0 Safe torque off
Event
1 0
FA82 Safe torque off 2
1 1
Inputs
Indication (running or stopped)
IN1 IN2
0 0
0 1 Fault
1 0 Fault
1 1
Selects how the drive reacts to incorrect input power
and motor cable connection (ie. input power cable is
connected to drive motor connection).
No action taken.
The drive trips on fault
Selects how the drive reacts to a motor stall
condition.
A stall condition is defined as follows:
• The drive exceeds the stall current limit (
current limit
), and
• the output frequency is below the level set by
31.27 Stall frequency limit
parameter
speed is below the level set by parameter
Stall speed limit
, and
• the conditions above have been true longer than
the time set by parameter
None (stall supervision disabled).
The drive generates an
The drive trips on fault
Stall current limit in percent of the nominal current of
the motor. See parameter
Stall current limit.
A5A0 Safe torque off
FA81 Safe torque off 1
FA82 Safe torque off 2
(Normal operation)
B5A0 Safe torque off
and fault
and fault
(Normal operation)
None
FA81 Safe torque off 1
FA82 Safe torque off 2
(Normal operation)
3181 Cross connection
31.25 Stall
or the motor
31.26
31.28 Stall time
.
A780 Motor stall
warning.
7121 Motor stall
.
31.24 Stall function
.
Parameters 193
Default
FbEq 16
3
4
5
Fault
0
. 1
No action
0
1
2
200.0%
-