ABB ACS280 Firmware Manual page 107

No. Name/Value
Other [bit]
06.32 MSW bit 13 selection
False
True
Other [bit]
06.33 MSW bit 14 selection
False
True
Other [bit]
07
07 System info
07.03 Drive rating id
07.04 Firmware name
07.05 Firmware version
07.06 Loading package name
07.07 Loading package
version
07.11 Cpu usage
0...100%
07.25 Customization package
name
07.26 Customization package
version
07.30 Adaptive program
status
Bit Name
0 Initialized
1 Editing
2 Edit done
3 Running
4-13 Reserved
14 State
changing
15 Faulted
0000h...FFFFh
07.31 AP sequence state
Description
Source selection (see
Selects a binary source whose status is transmitted
as bit 13 (User bit 2) of
0.
1.
Source selection (see
Selects a binary source whose status is transmitted
as bit 14 (User bit 3) of
0.
1.
Source selection (see
Drive hardware and firmware information.
All parameters in this group are read-only.
Type of the drive/inverter unit.
Firmware identification.
Version number of the firmware.
Name of the firmware loading package.
Version number of the firmware loading package.
Microprocessor load in percent.
Microprocessor load.
First five ASCII letters of the name given to the
customization package. The full name is visible under
System info on the control panel or the Drive
composer PC tool.
_N/A_ = None.
Customization package version number. Also visible
under System info on the control panel or the Drive
composer PC tool.
Shows the status of the adaptive program.
Adaptive programming
See section
Description
Adaptive program initialized.
Adaptive program in editing state.
Editing of the adaptive program finished.
Adaptive program running.
State changing on-going in the adaptive programming engine.
Adaptive program faulted.
Adaptive program status
Shows the number of the active state of the sequence
program part of the adaptive program (AP). If
adaptive programming is not running, or it does not
contain a sequence program, the parameter is zero.
Terms and abbreviations
06.11 Main status word
Terms and abbreviations
06.11 Main status word
Terms and abbreviations
on page
Parameters 107
Default
FbEq 16
). -
False
.
0
1
). -
False
.
0
1
). -
-
-
-
-
-
-
1 = 1
-
-
-
31
.
1 = 1