ABB ACS280 Firmware Manual page 108

108 Parameters
No. Name/Value
09
10 Standard DI, RO
10.01 DI status
Bit Value
0 DI1 = Status of digital input 1.
1 DI2 = Status of digital input 2.
2 DI3 = Status of digital input 3.
3 DI4 = Status of digital input 4.
6...15 Reserved.
0000h...FFFFh
10.02 DI delayed status
Bit Value
0 DI1 = Delayed status of digital input 1.
1 DI2 = Delayed status of digital input 2.
2 DI3 = Delayed status of digital input 3.
3 DI4 = Delayed status of digital input 4.
6...15 Reserved.
0000h...FFFFh
10.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
1 1 = Force DI2 to value of bit 1 of parameter
2 1 = Force DI3 to value of bit 2 of parameter
3 1 = Force DI4 to value of bit 3 of parameter
5...15 Reserved.
0000h...FFFFh
10.04 DI forced data
Bit Value
0 Force the value of this bit to DI1, if so defined in parameter
1 Force the value of this bit to DI2, if so defined in parameter
2 Force the value of this bit to DI3, if so defined in parameter
3 Force the value of this bit to DI4, if so defined in parameter
5...15 Reserved.
Description
Configuration of digital inputs and relay outputs.
Displays the status of digital inputs.
Status of digital inputs.
Displays the status of digital inputs. This word is
updated only after activation / deactivation delays.
Delayed status of digital inputs.
Selects the digital inputs, states of which will be
controlled by parameter
10.04 DI forced data
parameter
digital input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Note: Boot and power cycle reset the force selections
10.03
(parameters and
Override selection for digital inputs.
Defines the forced values for the digital inputs
selected by parameter
only possible to force an input that has been selected
10.03 DI force selection
in parameter
Bit 0 is the forced value for DI1.
10.04 DI forced data
. A bit in
is provided for each
10.04
).
10.04 DI forced data
10.04 DI forced data
10.04 DI forced data
10.04 DI forced data
10.03 DI force selection
.
10.03 DI force selection
10.03 DI force selection
10.03 DI force selection
10.03 DI force selection
Default
FbEq 16
0000h
1 = 1
0000h
1 = 1
0000h
.
.
.
.
1 = 1
0000h
. It is
.
.
.
.