ABB ACS280 Firmware Manual page 147

No. Name/Value
Frequency input 1
Control panel (ref
saved)
Control panel (ref
copied)
Frequency input 2
Other
22.12 Ext1 speed ref2
Zero
AI1 scaled
AI2 scaled
EFB ref1
EFB ref2
Motor potentiometer
PID
Frequency input 1
Description
11.38 Freq in 1 actual value
a frequency input).
03.01 Panel reference
Panel reference (
saved by the control system for the location where
the control returns is used as the reference.
Reference
Ext1 -> Ext2
03.01 Panel reference
Panel reference (
previous control location is used as the reference
when the control location changes if the references
for the two locations are of the same type (eg
frequency/speed/torque/PID); otherwise, the actual
signal is used as the new reference.
Reference
Ext1 -> Ext2
11.46 Freq in 2 actual value
a frequency input).
Source selection (see
Selects Ext1 speed reference source 2.
For the diagram of reference source selection, see
22.11 Ext1 speed ref1
parameter
None.
12.12 AI1 scaled value
.
12.22 AI2 scaled value
.
03.09 EFB reference 1
.
03.10 EFB reference 2
.
22.80 Motor potentiometer ref act
motor potentiometer).
40.01 Process PID output actual
process PID controller).
11.38 Freq in 1 actual value
a frequency input).
(when DI3 or DI4 is used as
, see page
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
for the
Ext1 reference
Ext2 reference
Active reference
Inactive reference
t
(when DI3 or DI4 is used as
Terms and abbreviations
.
(output of the
(output of the
(when DI3 or DI4 is used as
Parameters 147
Default
FbEq 16
17
96
) 18
19
22
). -
Zero
0
1
2
8
9
15
16
17