ABB ACS280 Firmware Manual page 275

No. Name/Value
96.11 User set save/load
No action
User set I/O mode
Load set 1
Load set 2
Load set 3
Load set 4
Save to set 1
Save to set 2
Save to set 3
Save to set 4
96.12 User set I/O mode in1
Not used
Used
DI1
DI2
DI3
DI4
Supervision 1
Supervision 2
Supervision 3
Description
Enables the saving and restoring of up to four custom
sets of parameter settings.
The set that was in use before powering down the
drive is in use after the next power-up.
Notes:
• Some hardware configuration settings, such as
fieldbus and encoder configuration parameters
(groups 14...16, 47, 50...58 and 92...93) are not
included in user parameter sets.
• Parameter changes made after loading a set are
not automatically stored – they must be saved
using this parameter.
• This parameter cannot be changed while the drive
is running
Load or save operation complete; normal operation.
Load user parameter set using parameters
set I/O mode in1 96.13 User set I/O mode in2
and
Load user parameter set 1.
Load user parameter set 2.
Load user parameter set 3.
Load user parameter set 4.
Save user parameter set 1.
Save user parameter set 2.
Save user parameter set 3.
Save user parameter set 4.
96.11 User set save/load
When parameter
User set I/O mode
, selects the user parameter set
together with parameter
as follows:
Status of
source defined source defined
96.12
by par. by par.
0
1
0
1
0.
1.
10.02 DI delayed status
Digital input DI1 (
10.02 DI delayed status
Digital input DI2 (
10.02 DI delayed status
Digital input DI3 (
10.02 DI delayed status
Digital input DI4 (
32.01 Supervision status
Bit 0 of
32.01 Supervision status
Bit 1 of
32.01 Supervision status
Bit 2 of
96.12 User
is set to
96.13 User set I/O mode in2
Status of User
parameter set
96.13
selected
0 Set 1
0 Set 2
1 Set 3
1 Set 4
, bit 0).
, bit 1).
, bit 2).
, bit 3).
.
.
.
Parameters 275
Default
FbEq 16
No action
0
1
.
2
3
4
5
18
19
20
21
not used
0
1
2
3
4
5
24
25
26