ABB ACS280 Firmware Manual page 365

Fieldbus control through the embedded fieldbus interface (EFB)
365
Bit Name Value State/Description
26 REQ_CTL 1 Control is requested in this channel.
0 Control is not requested in this channel.
27 ... Reserved
31
State transition diagrams

State transition diagram for the ABB Drives profile
The diagram below shows the state transitions in the drive when the drive is
using the ABB Drives profile and the drive is configured to follow the commands
of the control word from the embedded fieldbus interface. The upper case texts
refer to the states which are used in the tables representing the fieldbus
Control and Status words.
See sections on page and
Control Word for the ABB Drives profile Status Word for
359
on page .
the ABB Drives profile
362