Ip Ospf Disable All - Allied Telesis AT-x510-28GTX Command Reference Manual

OSPF C
OMMANDS

IP OSPF DISABLE ALL

ip ospf disable all
Overview This command completely disables OSPF packet processing on a VLAN interface. It
overrides the
the specific interface.
Use the no variant of this command to restore OSPF packet processing on a
selected interface.
ip ospf disable all
Syntax
no ip ospf disable all
Mode Interface Configuration for a VLAN interface.
awplus#
Example
awplus(config)#
awplus(config-if)#
C613-50102-01 REV C
network area command and disables the processing of packets on
configure terminal
interface vlan2
ip ospf disable all
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
932