Show Diffserv Service; Show Diffserv Service Brief - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

If the Policy Name is not specified this command displays a list of all defined DiffServ policies.
The following fields are displayed:
Definition
Term
Policy Name The name of this policy. (The order in which the policies are displayed is not necessarily
the same order in which they were created.)
Policy Type The policy type (Only inbound is supported).
Class Members List of all class names associated with this policy.

show diffserv service

This command displays policy service information for the specified interface and direction. The
<unit/slot/port> parameter specifies a valid unit/slot/port number for the system.
Format
show diffserv service <unit/slot/port> in
Mode Privileged EXEC
Term Definition
DiffServ Admin The current setting of the DiffServ administrative mode. An attached policy is only in effect
Mode
on an interface while DiffServ is in an enabled mode.
Interface Valid unit, slot, and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational The current operational status of this DiffServ service interface.
Status
Policy Name The name of the policy attached to the interface in the indicated direction.
Policy Details Attached policy details, whose content is identical to that described for the show policy-
map <policymapname> command (content not repeated here for brevity).

show diffserv service brief

This command displays all interfaces in the system to which a DiffServ policy has been attached.
The inbound direction parameter is optional.
Format
show diffserv service brief [in]
Mode Privileged EXEC
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
8-30