Create A Routing Interface With The Vlan Static Routing Wizard - NETGEAR GS418TPP User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Create a routing interface with the VLAN Static Routing
Wizard
The VLAN Static Routing Wizard lets you create a VLAN routing interface, configure the IP
address and subnet mask for the interface, and add ports, LAGs, or both to the VLAN. With
this wizard, you can do the following:
• Create a VLAN.
• Add ports to the newly created VLAN and remove selected ports from the default VLAN.
• Optionally, create a LAG, add ports to the LAG, then add the LAG to the newly created
VLAN.
• Enable tagging on selected ports if the port is in another VLAN. Disable tagging if a
selected port does not exist in another VLAN.
• Enable routing on the VLAN using the IP address and subnet mask entered.
To use the VLAN Static Routing Wizard:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> VLAN > VLAN Routing Wizard.
Configure Routing 241 User Manual