Arp Dynamicrenew; Arp Purge - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.1.3.1 no arp cachesize
This command configures the default ARP cache size.
Format
Mode

14.1.4 arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Format
Mode
14.1.4.1 no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
Mode

14.1.5 arp purge

This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format
Mode
Routing Commands
no arp cachesize
Global Config
arp dynamicrenew
Privileged EXEC
no arp dynamicrenew
Privileged EXEC
arp purge <ipaddr>
Privileged EXEC
v1.0, March 2006
14-3