Arp Dynamicrenew; Arp Purge; Arp Resptime - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.1.4 arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Format
Mode
14.1.4.1 no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
Mode

14.1.5 arp purge

This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format
Mode

14.1.6 arp resptime

This command configures the ARP request response timeout. The value for
a valid positive integer, which represents the IP ARP entry response timeout time in
seconds. The range for
Default
Format
Mode
14.1.6.1 no arp resptime
This command configures the default ARP request response timeout.
Format
Mode
Routing Commands
arp dynamicrenew
Privileged EXEC
no arp dynamicrenew
Privileged EXEC
arp purge <ipaddr>
Privileged EXEC
is between 1-10 seconds.
<seconds>
l
arp resptime <1-10>
Global Config
no arp resptime
Global Config
v4.1, October 2008
is
<seconds>
14-3