Show Dot1X Users - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
show dot1x clients {<unit/slot/port> | all}
Mode Privileged EXEC
Term Definition
Logical The logical port number associated with a client.
Interface
Interface The physical port to which the supplicant is associated.
User Name The user name used by the client to authenticate to the server.
Supplicant MAC The supplicant device MAC address.
Address
Session Time The time since the supplicant is logged on.
Filter ID Identifies the Filter ID returned by the RADIUS server when the client was authenticated.
This is a configured DiffServ policy name on the switch.
VLAN ID The VLAN assigned to the port.
VLAN Assigned The reason the VLAN identified in the VLAN ID field has been assigned to the port.
Possible values are RADIUS, Unauthenticated VLAN, or Default. When the VLAN
Assigned reason is Default, it means that the VLAN was assigned to the port because
the PVID of the port was that VLAN ID.
Session This value indicates the time for which the given session is valid. The time period in
Timeout
seconds is returned by the RADIUS server on authentication of the port. This value is
valid for the port only when the port-control mode is not MAC-based.
Session This value indicates the action to be taken once the session timeout expires. Possible
Termination
values are Default and Radius-Request. If the value is Default, the session is terminated
Action
and client details are cleared. If the value is Radius-Request, then a reauthentication of
the client is performed.

show dot1x users

This command displays 802.1x port security user information for locally configured users.
Format
show dot1x users <unit/slot/port>
Mode Privileged EXEC
Term Definition
Users Users configured locally to have access to the specified port.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-77