Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
11.1.20 show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format
Mode
User
11.1.21 show users authentication
This command displays all user and all authentication login information. It also displays
the authentication login list assigned to the default user.
Format
Mode
User
System Login
802.1x Port
Security
11.2 RADIUS Commands
This section describes the commands you use to configure the 7200 Series Managed
Switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your
network for authentication and accounting.
11.2.1 radius accounting mode
Use this command to enable the RADIUS accounting function.
Default
Format
Mode
Port-Based Access and Authentication Commands
show dot1x users <slot/port>
Privileged EXEC
Users configured locally to have access to the specified port.
show users authentication
Privileged EXEC
Lists every user that has an authentication login list assigned.
Displays the authentication login list assigned to the user for
system login.
Displays the authentication login list assigned to the user for
802.1x port security.
disabled
radius accounting mode
Global Config
v1.0, February 2007
11-13