Show Dot1X Users; Show Users Authentication - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
EAP Response
Frames Received
EAP Request/Id
Frames
Transmitted
EAP Request
Frames
Transmitted
Invalid EAPOL
Frames Received
EAP Length Error
Frames Received

11.1.21 show dot1x users

This command displays 802.1x port security user information for locally configured users.
Format
Mode
User

11.1.22 show users authentication

This command displays all user and all authentication login information. It also displays
the authentication login list assigned to the default user.
Format
Mode
User
System Login
802.1x Port
Security
Port-Based Access and Authentication Commands
The number of valid EAP response frames (other than resp/id
frames) that have been received by this authenticator.
The number of EAP request/identity frames that have been
transmitted by this authenticator.
The number of EAP request frames (other than request/iden-
tity frames) that have been transmitted by this authenticator.
The number of EAPOL frames that have been received by
this authenticator in which the frame type is not recognized.
The number of EAPOL frames that have been received by
this authenticator in which the frame type is not recognized.
show dot1x users <unit/slot/port>
Privileged EXEC
Users configured locally to have access to the specified port.
show users authentication
Privileged EXEC
Lists every user that has an authentication login list assigned.
Displays the authentication login list assigned to the user for
system login.
Displays the authentication login list assigned to the user for
802.1x port security.
v4.1, October 2008
11-13