Port GMRP Mode
Port GVRP Mode
config garp gmrp adminmode
This command enables or disables GARP Multicast Registration Protocol (GMRP) on the system.
The default value is disable.
Format
config garp gmrp adminmode <enable/disable>
config garp gmrp interfacemode
This command enables or disables GARP Multicast Registration Protocol on a selected interface.
The <slot.port> parameter identifies the interface on which to configure the mode. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a LAG, GARP
functionality will be disabled on that interface. GARP functionality will subsequently be re-
enabled if routing is disabled and LAG membership is removed from an interface that has GARP
enabled.
Default
Format
config garp gmrp interfacemode <slot.port/all> <enable/disable>
config garp gvrp adminmode
This command enables or disables GVRP.
Default
Format
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
Indicates the GMRP administrative mode for the port. It may be
enabled or disabled. If this parameter is disabled, Join Time,
Leave Time and Leave All Time have no effect. The factory
default is disabled.
Indicates the GVRP administrative mode for the port. It may be
enabled or disabled. If this parameter is disabled, Join Time,
Leave Time and Leave All Time have no effect. The factory
default is disabled.
disable
disable
config garp gvrp adminmode <enable|disable>
May 30, 2003 Beta Draft
7-39