Multiple Registration Protocol Overview - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The link is selected by creating a binary pattern from selected fields in a packet, and
associating that pattern with a particular link:
Src MAC,VLAN,EType,incoming port. Source MAC, VLAN, EtherType, and incoming
•
port associated with the packet.
Dest MAC,VLAN,EType,incoming port. Destination MAC, VLAN, EtherType, and
•
incoming port associated with the packet.
Src/Dest MAC,VLAN,EType,incoming port. Source/Destination MAC, VLAN,
•
EtherType, and incoming port associated with the packet. This option is the default.
Src IP and Src TCP/UDP Port fields. Source IP and Source TCP/UDP fields of the
•
packet.
Dest IP and Dest TCP/UDP Port fields. Destination IP and Destination TCP/UDP Port
•
fields of the packet.
Src/Dest IP and TCP/UDP Port fields. Source/Destination IP and source/destination
•
TCP/UDP Port fields of the packet.
Enhanced Hashing Mode. Features MODULO-N operation based on the number of
•
ports in the LAG, non-unicast traffic and unicast traffic hashing using a common hash
algorithm, excellent load balancing performance, and packet attributes selection
based on the packet type:
For L2 packets, source and destination MAC address are used for hash
-
computation.
For L3 packets, source IP, destination IP address, TCP/UDP ports are used.
-
Use the Port Selection Table to select the ports as members of the LAG.
14.
Click the Apply button.
15.
Your settings are saved.

Multiple Registration Protocol Overview

Like 802.1AS, Multiple Registration Protocol (MRP) is an audio video bridging (AVB) feature
that is available on some FASTPATH platforms. MVR is a base registration protocol that
enables devices running an MRP application to register attributes to other devices in a
network. MRP provides an application to register attributes such as bandwidth for a given AV
stream and MAC address information. It is used by various applications to propagate the
registration. Blade switches support the following MRP applications:
Multiple MAC Registration Protocol (MMRP). MMRP allows for the propagation MAC
•
address information in the network, and allows for the registration and deregistration of
both individual MAC address information and group MAC address membership. End
stations can request to join or leave a multicast group, or to register an individual MAC
address with a specific VLAN. MAC address entries can be dynamically registered and
deregistered if MMRP is administratively enabled on the switch.
Multiple VLAN Registration Protocol (MVRP). MVRP registers VLANs in the network,
•
enabling automatic VLAN configuration on the switch. In a typical network, VLAN tagging
is common. Many nodes require ingress traffic to be tagged with a specific VLAN ID, and
Configure Switching Information
272