Screen Items (Control) - Mitsubishi Electric M800VW Series Manual

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

6 Explanation of Built-in Editing Function (PLC On-board)

6.3 Operation Key List

6.3.2 Screen Items (Control)

Table background colors

Some of the tables used in PLC On-board screens contain both areas where values are input and areas where values are

selected. For this reason, different background colors are used to visually distinguish between input areas and selection

areas. The following table describes these background colors.

Background color

Selecting input and selection items

There are two methods used to select input and selection items.

 Select using the Tab keys ( → |, | ← )

Select and enable items that can be input or selected in a predetermined order. The background color of the title of a selected

item changes to blue. (Refer to the area of the following diagram with a red circle.)

[(Example) "CROSS REF. LIST" screen]

Selects items in forward order from (1) to (2), returning back from (4) to (1).

Press [ → |]

Selects items in reverse order from (4) to (3), returning back from (1) to (4).

Press [| ← ]

Indicates areas where values are input. (area inside the green lines in the following dia-

Indicates areas where values are selected. (area inside the blue lines in the following dia-

Indicates the position of the current selection under focus. (area inside the red lines in the

following diagram)

Indicates areas where values cannot be input or selected.

IB-1501614-B