Screen Display Items; Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus

6.14.8.2 Screen Display Items

The following table describes the screen display items for the verify results popup screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
List
Result

6.14.8.3 Enabled/Disabled State of Menu Keys

The menu keys displayed on the verify results popup screen are always enabled.

6.14.8.4 Status during Screen Displays

The following table describes the status when displaying the verify results popup screen.
Item name
This displays the information that does not match.
List
This is a blank display if there all data matches.

6.14.8.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Close

6.14.8.6 Closing the Verify Results Popup Screen

Use any of the following methods to close the verify results popup screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the information that does not match.
This is a blank display if there all data matches.
This displays the verification result.
Operation
Refer to "6.14.8.6 Closing the Verify Results Popup Screen".
This is the default focus position when the screen is displayed.
This displays the information that does not match.
Refer to "6.14.8.6 Closing the Verify Results Popup Screen".
430
Display state
Operation