M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
6.14.4.2 Screen Display Items
The following table describes the screen display items for the "NC->EXT." screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
List
6.14.4.3 Enabled/Disabled State of Menu Keys
The following table describes the conditions upon which menu keys displayed on the "NC->EXT." screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Select/cancel all data
Parameter + Program
Select/cancel data
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the PLC data stored in the current project.
This displays nothing if there is nothing stored.
Condition upon which it is enabled/disabled
Enabled when selectable PLC data has been added to the list
Disabled when storing a GX Works2 project because all data is always selected.
Enabled when selectable PLC data has been added to the list
Disabled when storing a GX Works2 project because all data is always selected.
Enabled when selectable PLC data has been added to the list
Disabled when storing a GX Works2 project because all data is always selected.
413
Display state
IB-1501614-B