M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.4 Preparation
5.4.2.5 Setting Connection Destination
The connection target must be specified before performing online operations from GX Works2 to the CNC controller.
The following TCP connection method is supported when connecting with Ethernet.
[TCP protocol: Connection type]
Used with typical networks. TCP is highly reliable (it requests re-transmission when data are lost), but not optimized for timely
delivery because of a large volume of communication it handles.
Start the setting screen by the following operation in the navigation window on GX Works2.
Select [Connection Destination], then double-click [Current Connection].
73
IB-1501614-B