Mitsubishi Electric M800VW Series Manual page 557

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Operation of key presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Trigger point setup
Bit device setup
Word device setup
Device setup condi.
Setting
Select data
Close
Trigger point setup
 Normal operation
(1) Press the menu key [TRIGGER POINT SETUP] to select the trigger point.
Go to (3) other than the specified devices.
(2) Enter the specified devices in reference to "Entering specified devices".
(3) Press the menu key [SETTING] to fix the trigger point setup entries. Pressing the menu key [SETTING] also closes the
trigger point setup screen, and the screen returns to the sampling trace main screen.
 Abnormal operation
The error messages in abnormal operations are same as the error message displayed on the trace point setup screen. Refer
to "Trace point setup screen: Trace point setup".
Closing the trigger point setup screen
Use any of the following methods to close the trigger point setup screen.
Methods to close the screen
Press the [SET] menu key.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B
Refer to "Closing the trigger point setup screen".
The focus is applied to the trigger point setup.
This changes the trigger point setup selection when the focus is already applied.
The focus is applied to the bit device field.
The focus is applied to the word device field.
The focus is applied to the device setup condi. field.
This changes the device setup condi. selection when the focus is already applied.
Refer to "Trigger point setup".
Cursor position
Bit device
("BIT DEVICE" column)
Bit device
("CONDI." column)
Word device
("WORD DEVICE" column)
Word device
("VALUE" column)
Word device
("MASK(HEX)" column)
Word device
("CONDI./FORMAT" column)
Device setup condi.
Refer to "Closing the trigger point setup screen".
532
Operation
This displays the device entry field.
This changes the condition selection.
This displays the device entry field.
This displays the value entry field.
This displays the mask entry field.
This changes the selection.
This changes the selection.