M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus
6.16.2.6 Common Comment File
COMMENT (Common/Global)
When [COMMENT (Common/Global)] is selected as the common comment file, a correspondence is created between the
sequence program and device comments as illustrated in the following diagram.
[Contains only common/global comments]
Common/Global comment are referenced in all sequence programs.
Sequence program (MAIN)
Sequence program (HLAD)
Sequence program (SUB01)
Sequence program (SUB02)
[Contains both common/global comments and program-specific/local comments]
Program-specific / local comments are only referenced in sequence programs with the same name. Common / global
comments are referenced in the other sequence programs.
Sequence program (MAIN)
Sequence program (HLAD)
Sequence program (SUB01)
Sequence program (SUB02)
Specifying other comment files
When [Specify other comment file] is selected as the common comment file, you can specify one comment file referenced by
all sequence programs.
Sequence program (MAIN)
Sequence program (HLAD)
Sequence program (SUB01)
Sequence program (SUB02)
Common/global comments (COMMENT)
Program-specific/local comments (MAIN)
Program-specific/local comments (MAIN)
Common/global comments (COMMENT)
Common/global comments (COMMENT)
Common/global comments (COMMENT)
Common/global comments (COMMENT)
497
IB-1501614-B