Mitsubishi Electric M800VW Series Manual page 304

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.3 Operation Key List
Selecting tree-structure data
Tree-structure data is configured of directories and data.
Directories and data are illustrated in the following diagram.
 Transitioning between/selecting directories and data
Use the [↑], [↓], [←], and [→] arrow keys to move between and select data one unit at a time. Use the [Page Up] and [Page
Down] keys to move between pages one at a time and to select data.
 Enabling and disabling data to be processed
The check box has two types of statuses: where the selection/deselection is enabled (white rectangle) or disabled (gray
rectangle).
There are two methods used to enable and disable selections.
 Move to and select the data to be set and press the [SP (space code)] key.
Selections that are checked are enabled and selections that are not checked are disabled.
Each press of the [SP] key switches between the enabled and disabled state.
 Move to and select the data to be set and press the [SELECT/CANCEL] menu key.
Selections that are checked are enabled and selections that are not checked are disabled.
Each press of the [SELECT/CANCEL] menu key switches between the enabled and disabled state.
 [+] and [-] symbols next to directories
 Pressing the [ → ] key for directories marked with the [+] symbol expands the directory to display the data within.
 Pressing the [ ← ] key for directories marked with the [-] symbol collapses the directory to no longer display the data within.
Directory
Data
Indicates the processing target.
Indicates the currently selected
object.
Indicates that the selection/deselection
operation is disabled.
279 IB-1501614-B