Trace File Write Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus

6.17.4.11 Trace File Write Screen

Outline
This displays a list of the trace files in the specified project, and writes to the specified trace file.
NC (On-board)
On-board trace files
Write data
Read data
Note
(1) Reading or writing the trace files is disabled during a trace.
(2) The trace files written by the On-board cannot be read by GX Developer. (incompatible)
(3) Trace files cannot be written to GX Works2 projects.
(4) When you execute file write after changing the trace conditions, only the trace conditions are written. If you change the
trace conditions, start tracing, and then attempt to export the trace results to a file without displaying the results, only the
trace conditions are output to a file. To have the trace results exported to a file, start tracing and then view the results
before executing the file export.
Write
Trace conditions Number of traces, trace points, trigger points, trace data, etc.
Trace results Trace data of the bit device and word device
The On-board original trace files
551
External device
GX Developer project
On-board trace files
IB-1501614-B