Mitsubishi Electric M800VW Series Manual page 161

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.6 Developing Simple Project

If there is a sequence program file of the same file name on GX Works2, the following dialog is displayed.

 When [Yes] is clicked in the above dialog, the sequence program file on GX Works2 is overwritten and deleted. Check

thoroughly before executing.

Read from PLC screen can also be used as the file list function of the CNC controller. The date and time of update and the

size of each file are displayed on the right side of the file name.

IB-1501614-B