M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.7 Developing Structured Project
5.7.7 Verifying the Sequence Programs
This section describes how to verify sequence programs between the CNC controller and GX Works2.
5.7.7.1 Operation Procedure
(1) Start the operation screen by the following operation on GX Works2.
[Online] -> [Verify with PLC]
(2) Select the sequence program file to verify on the following screen, and click [Execute].
Note
The memory that has the file to be verified is valid as [Target Memory Setting].
IB-1501614-B
168