Starting And Stopping The Monitor For The Selected Device; Closing The Device Batch Monitor Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus

6.17.2.6 Starting and Stopping the Monitor for the Selected Device

Starting the monitor
(1) Press the [DEVICE] menu key and enter the device you want to monitor into the device selection field.
(2) Press the [FORMAT] menu key and select the format from the format selection field.
(3) Press the [DISPLAY] menu key and select the display format for the current value from the display selection field.
(4) Press the [VALUE] menu key and select the type of value to display for the current value from the value section field.
(5) Press the [START MONITOR] menu key to start the monitor. Starting the monitor moves the focus to the list. "MONITOR"
is also displayed in the top-right of the screen.
(6) Use the up/down arrow keys, Page Up key, and Page Down key to move within the list and check the monitoring status of
the devices downstream and upstream from the specified device.
Stopping the monitor
(1) Pressing the [STOP MONITOR] menu key while monitoring devices stops the monitor. "MONITOR" display in the top-
right of the screen is also canceled.

6.17.2.7 Closing the Device Batch Monitor Screen

Use any of the following methods to close the device batch monitor screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B 510