Mitsubishi Electric M800VW Series Manual page 343

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation
To use multiple projects
Procedure
Start
Main
Select the current project.
Main
Display the ladder screen.
Main/ladder
Main/ladder
Main/ladder
Return to the main screen.
Main
Write the added sequence
program to ROM.
Main/NC file operation
ROM write
Complete
IB-1501614-B
Operation
Screen position Menu button
SELECT PROJECT
LADDER
EDIT
CONVERT LADDER
NC FILE
ROM WRITE
EXECUTE
318
Select the current operation project.
Transition to the ladder screen.
Switch to the edit mode.
Create a program.
<Ladder sample>
M0
P4002 |-|/|------[INC D0]-|
Edited ladder data is confirmed
by the conversion operation.
Return to the main screen.
Repeat this procedure until the
sequence program has been stored in
all projects.
Transition to the NC file operation
screen.
The ROM write popup screen displays.
Execute the ROM write operation.