Status During Screen Displays; Operation Of Key Presses; Checking Programs - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus

6.15.8.4 Status during Screen Displays

The following table describes the screen display items for the check program popup screen.
Item name
Program
Check details
Instruction
Ladder
Double coil
Device
Consistency
Result list

6.15.8.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Program
Execute
Result list
Jump
Instruction check
Ladder check
Double coil check
Device check
Consistency check
Close

6.15.8.6 Checking Programs

(1) Press the [CHECK PROGRAM] menu key and select whether the program to be checked is the currently displayed pro-
gram or the entire program stored in the current project.
(2) Press the [INST. CHECK] menu key to select whether or not to perform the instruction check.
(3) Press the [LADDER CHECK] menu key to select whether or not to perform the ladder check.
(4) Press the [DOUBLE COIL CHECK] menu key to select whether or not to perform the double coil check.
(5) Press the [DEVICE CHECK] menu key to select whether or not to perform the device check.
(6) Press the [CONSIST. CHECK] menu key to select whether or not to perform the consistency check.
(7) Press the [EXECUTE] menu key to start the checks.
A progress bar is displayed indicating the status during the program checks.
(8) Press the [RESULT LIST] menu key to select the result list. Use the up/down arrow keys, Page Up key, and Page Down
key to select the area where errors occurred in the ladder you want to check.
(9) Press the [JUMP] menu key. Move the cursor on the ladder screen to the program or step position present in the ladder
selected in the result list.
This selects the current display.
This displays the execution of the instruction check (when applicable).
This displays the execution of the ladder check (when applicable).
This displays the execution of the double coil check (when applicable).
This displays the execution of the device check (when applicable).
This displays the execution of the consistency check (when applicable).
This is left blank.
Refer to "6.15.8.7 Closing the Check Program Popup Screen".
This selects the check program selection field or changes the selection of the
program to be checked.
Refer to "6.15.8.6 Checking Programs".
This selects the result list.
This moves the cursor on the ladder screen to the step position selected in the
list.
This selects the check instruction selection field or changes the selection to ex-
ecute/not execute the instruction check.
This selects the check ladder selection field or changes the selection to execute/
not execute the ladder check.
This selects the check double coil selection field or changes the selection to ex-
ecute/not execute the double coil check.
This selects the check device selection field or changes the selection to execute/
not execute the device check.
This selects the check consistency selection field or changes the selection to ex-
ecute/not execute the consistency check.
Refer to "6.15.8.7 Closing the Check Program Popup Screen".
479
Display state
Operation
IB-1501614-B