Mitsubishi Electric M800VW Series Manual page 8

For Safe Use
Mitsubishi CNC is designed and manufactured solely for applications to machine tools to be used for industrial purposes.
Do not use this product in any applications other than those specified above, especially those which are substantially
influential on the public interest or which are expected to have significant influence on human lives or properties.
Not applicable in this manual.
Not applicable in this manual.
 Items related to product and manual
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the
machine tool builder takes precedence over this manual.
The operations to which no reference is made in this manual should be considered "impossible".
This manual is written on the assumption that all the applicable functions are included. Some of them,
however, may not be available for your NC system. Refer to the specifications issued by the machine tool
builder before use.
For information about each machine tool, refer to manuals issued from the machine tool builder.
Some screens and functions may differ depending on each NC system (or version), and some functions may
not be possible. Please confirm the specifications before starting to use.
To protect the availability, integrity and confidentiality of the NC system against cyber-attacks including
unauthorized access, denial-of-service (DoS) (*1) attack, and computer virus from external sources via a
network, take security measures such as firewall, VPN, and anti-virus software.
Mitsubishi Electric assumes no responsibility for any problems caused to the NC system by any type of
cyber-attacks including DoS attack, unauthorized access and computer virus.
(*1) Denial-of-service (DoS) refers to a type of cyber-attack that disrupts services by overloading the system or by
exploiting a vulnerability of the system.
 Items related to start up and maintenance
Read this manual carefully and confirm the safety enough before executing the operation of the program
change, forced output, RUN, STOP, etc. during operation. Operation mistakes may cause damage of the
machine and accidents.
 Items related to program development
Always observe the cautions before development to develop a program.
If the data transferred does not follow the file name rule, unexpected operations will occur. E.g. PLC program
erasure
Do not read a sequence program on which a conversion error occurred into the GX Developer/GX Works2.
The file may include unexpected contents to result an illegal operation.
When an error occurred at GX Developer/GX Works2 on-line function, the error message may not explain
exactly the state in the CNC side. Always refer to the error list.
DANGER
WARNING
CAUTION