M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.12.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the PLC version up screen are always enabled.
6.13.12.4 Status during Screen Displays
The following table describes the status when displaying the PLC version up screen.
Item name
List
6.13.12.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Execute
Select/cancel all data
Select version up data
Select/cancel data
Close
IB-1501614-B
This is the default focus position when the screen is displayed.
This lists the sequence programs, PLC messages, device comments and
parameters in the tree view, which are the results of comparison between
the PLC data stored in the NC and those stored in the updating version
data.
If there is nothing stored or no updating version data has been selected,
this lists the PLC data of the NC in the tree view, with the setting opera-
tion of the sequence programs, PLC messages, device comments and
parameters disabled.
This closes the PLC version up screen.
The focus is applied to the list.
Refer to "6.13.12.6 Update the PLC Version".
This selects/deselects the check boxes for all data in the list.
This displays the select version up data popup screen.
Refer to "6.13.13 Select Version Up Data Popup Screen" for details.
This selects/deselects the checkboxes for data selected in the list.
This operation can also be performed with the [SP (space)] key.
This closes the PLC version up screen.
382
Display state
Operation