Add New Data Popup Screen; Outline; Screen Display Items; Enabled/Disabled State Of Menu Keys - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus

6.13.5 Add New Data Popup Screen

6.13.5.1 Outline

This enables new PLC data to be created for the current project.

6.13.5.2 Screen Display Items

The following table describes the screen display items for the add new data popup screen.
Item name
Data type
Data name
Title
(*1) Refer to "6.6.1 PLC Data Used by the PLC On-board" for information on restrictions to PLC data names and titles.

6.13.5.3 Enabled/Disabled State of Menu Keys

The menu keys displayed on the add new data popup screen are always enabled.

6.13.5.4 Status during Screen Displays

The following table describes the status when displaying the add new data popup screen.
Item name
Data name
This displays only programs.
This is left blank.
These are restricted to a maximum of 8 single-byte alphanumeric numeric char-
acters.(*1)
This is left blank.
These are restricted to a maximum of 8 single-byte alphanumeric numeric char-
acters.(*1)
This is the default focus position when the screen is displayed.
359
Display state
Operation
IB-1501614-B