External File Operation Menus; External File Operation Main Screen; Screen Display Items; Enabled/Disabled State Of Menu Keys - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)

6.14 External File Operation Menus

6.14 External File Operation Menus

6.14.1 External File Operation Main Screen

This is used to perform operations on PLC data stored in external devices.

6.14.1.1 Screen Display Items

The following table describes the screen display items for the external file operation screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard

6.14.1.2 Enabled/Disabled State of Menu Keys

The following table describes the conditions upon which menu keys displayed on the external file operation screen are
enabled/disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
EXT.->NC
NC -> External
DELETE EXT. FILE
VERIFY EXT. FILE
PLC RUN/STOP
PASSWORD CANCEL.
Operation of key presses
The following table describes the operation of the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
IB-1501614-B
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
Condition upon which it is enabled/disabled
Disabled when the function is restricted.
Disabled when the function is restricted.
Hidden when operation mode of the project is GX Works2.
Hidden when operation mode of the project is GX Works2.
Disabled when the function is restricted.
Disabled when the function is restricted.
These transition to the main menu.
This displays the specified screen.
400
Display state
Operation