M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
6.15.4 Find Step No. Popup Screen
6.15.4.1 Outline
This enables transitions to the specified step position when editing and monitoring ladders.
6.15.4.2 Screen Display Items
The following table describes the screen display items for the find step No. popup screen.
Item name
Find step No.
6.15.4.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the find step No. popup screen are always enabled.
6.15.4.4 Status during Screen Displays
The following table describes the status when displaying the find step No. popup screen.
Item name
Find step No.
This displays the step No. position to which you want to transition.
This is left blank.
This is the default focus position when the screen is displayed.
465
Display state
Operation
IB-1501614-B