M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus
6.16.2.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Comment line
Comment display
Statement display
Note display
Alias display
Alias display form
Common comment file
Select comment file
Settings
Close
IB-1501614-B
Refer to "6.16.2.8 Closing the Comment Display Settings Screen".
This sets the focus to the comment line.
This changes the comment line selection when the focus is already set.
This sets the focus to the comment display.
This changes the comment display selection when the focus is already set.
This sets the focus to the statement display.
This changes the statement display selection when the focus is already set.
This sets the focus to the note display.
This changes the note display selection when the focus is already set.
This sets the focus to the alias display.
This changes the alias display selection when the focus is already set.
This sets the focus to the alias display form.
This changes the alias display form selection when the focus is already set.
This sets the focus to the common comment file.
This changes the common comment file selection when the focus is already set.
This sets the focus to the select comment file.
Refer to "6.16.2.7 Setting the Comment Display State".
Refer to "6.16.2.8 Closing the Comment Display Settings Screen".
496
Operation