Status During Screen Displays; Operation Of Key Presses; Renaming The Plc Data - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus

6.13.7.4 Status during Screen Displays

The following table describes the status when displaying the rename data popup screen.
Item name
Data type
Old data name
New data name
Title

6.13.7.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Data type
Old data name
New data name
Title
Change
Close

6.13.7.6 Renaming the PLC Data

Normal operation
(1) Press the [DATA TYPE] menu key and select the data type you want to change from the data type selection field.
(2) Press the [DATA NAME] menu key and enter the current PLC data name into the old data name input field.
(3) Press the [DATA NAME] menu key and enter the new PLC data name into the new data name input field.
(4) Press the [CHANGE] menu key. Pressing the [CHANGE] menu key closes the rename data popup screen and changes
the data name. The old PLC data name is removed from the list on the file operation screen and the new PLC data name
is displayed.
If a password to protect against reads or reads/writes has been registered to the selected data, the cancel password screen is
displayed.
Enter the password to cancel the password.
If the password is canceled, processing will continue.
Refer to "6.21 Canceling File Passwords" for information on clearing passwords.
IB-1501614-B
This is the default focus position when the screen is displayed.
This selects either programs or the data type of selected data.
This selects either blank displays or the data names of selected data.
If the data type is parameter, data input is disabled for blank fields.
This is left blank.
If the data type is parameter, data input is disabled for blank fields.
This selects either blank fields or the titles of selected data.
Refer to "6.13.7.7 Closing the Rename Data Name Popup Screen".
This selects either the data type selection field or changes the data type selec-
tion.
This selects the old data name input field.
This selects the new data name input field.
This selects the title input field.
Refer to "6.13.7.6 Renaming the PLC Data".
Refer to "6.13.7.7 Closing the Rename Data Name Popup Screen".
Operation
Operation
366