Mitsubishi Electric M800VW Series Manual page 163

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.6 Developing Simple Project

Select [Yes] when the following dialog is displayed. Sequence programs and label data are read.

 When [Yes] is clicked in the above dialog, the sequence program files, labels and FB on GX Works2, are overwritten

and deleted. Check thoroughly before executing. (No prompt for overwrite confirmation is displayed even when there is

a file of the same name.)

The "Read from PLC" screen can also be used as file list function of the CNC controller. The date and time of update and

the size of each file is displayed on the right side of the file name.

IB-1501614-B