M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus
6.15.10.2 Screen display items
The following table describes the screen display items for the FB instance monitor screen.
Item name
Connected CNC name
Current project No.
Current project label
Program name
Step number
Monitor/Edit display
PLC status and overwrite/insert display This displays the PLC state (RUN/STOP).
Alarm message
Left arrow key
Software keyboard
6.15.10.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the FB instance monitor screen are always enabled.
6.15.10.4 Operation of Key Presses
Item name
Left arrow key
Find
Find Step No.
Device Test
FB Instance Monitor
Current value monitor changeover (10/
16)
PLC RUN/STOP
Comment ON/OFF
ZOOM DISPLAY
BACK
This displays the name of the connected CNC.
This displays the current project number.
This displays the project label.
This displays the name of the currently displayed program.
This displays the step number of the currently displayed program.
This displays the [MONITOR].
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This closes the displayed FB instance monitor screen.
This displays the find popup screen.
(Refer to "6.15.3 Find Popup Screen")
This opens the Find Step No. popup screen.
(Refer to "6.15.4 Find Step No. Popup Screen")
This displays the device test popup screen.
(Refer to "6.15.5 Device Test Popup Screen")
This displays the FB instance monitor.
This changes the currently monitored value display between decimal and hexa-
decimal.
Display the PLC RUN/STOP popup screen.
This turns the device comment display ON and OFF.
This changes the display magnification of the ladder screen.
This returns to the source "Ladder monitor" screen or "FB instance monitor"
screen.
487
Display state
Display state
IB-1501614-B